ENTIRE COULTER SUB-FRAME ADJUSTMENT
5.)
Hydraulic depth stop: The
depth of
the coulters is adjusted at the hydraulic
depth stop located on the left-hand side
of the center section. Raising the depth
stop will decrease the coulter depth.
Lowering the depth stop will increase
the depth.
6). Pull ahead at field speed and check overall setting of drill.
A). Inspect the actual depth of seed in several places along the drill.
Check 1: Behind the wing gauge wheels.
Check 2: Towards the outer end of the drill but not behind the
wing gauge wheel tracks.
Check 3: Behind the wheel tracks of the tractor.
Check 4: Towards the center of the drill but not behind
the tractor tracks.
B). Recheck settings after making any necessary adjustments.
INDIVIDUAL COMPONENT
ADJUSTMENT
Frame height adjustment methods depend on coulter configuration:
1.
Frame-Mounted Coulters
2.
Unit-Mounted Coulters
3.
No Coulters