GREAT PLAINS LC25 Скачать руководство пользователя страница 38

Страница: 38 / 62

2018-08-15

Table of Contents

Index

591-049M

LC25/40

Table of Contents

Index

Adjustments

Furrower Disc Adjustments (LC25/40)

Adjustments are provided for disc height, spread, angle
and cant.

Sharp Object Hazard:

Be cautious when working near the lister. The edges of the
furrower discs may be sharp.

Refer to Figure 27 and Figure 28

Furrower Disc Angle

This setting needs to be adjusted for your furrow profile
and conditions. The other furrower adjustments are often
satisfactory at their factory settings.

Loosen the nuts at the slot bolts

and the pivot bolts

top and bottom (8 fasteners total).

Set the disc angle as desired. Re-tighten nuts.

Furrower Disc Height

The factory default setting is notches

up, anchor

weldment-low (mounting bolts in upper holes of anchor
weldment

), and channels

/disc-mounts

centered

on each other.

If it is necessary to change the furrower height, first see if
the channel/mount adjustment suffices. Loosen both
nuts

on one disc side. Slide the mount

up or down

on the channel

. Re-tighten.

To adjust up to



inch (2.5 cm) lower, dismount the

anchor weldment

and invert it (notches

down).

If it is necessary to move the anchor weldment, it may
also be necessary to disturb the angle adjustments to
gain access to the mounting nuts

and bolts.

Furrower Disc Spread and Cant

In addition to height, loosing the nuts

for the

channels

/disc-mount

connection also provides

adjustment for spread (distance between discs) and cant
(vertical disc angle). Be sure to note and restore the
height set at this interface.

Figure 27

Furrower Height

34881

Figure 28

Furrower Adjustments

34882

Содержание LC25































































Результаты поиска

Содержание LC25

Отзывы:

GREAT PLAINS LC25, Руководство оператора, Страница: 38 / 62

Результаты поиска

Содержание LC25

Отзывы: