GREAT PLAINS FCA 4500-7275, Инструкция по сборке, Страница: 18 / 58

2019-03-21 Table of Contents Index 560-594Q-ENG
FCA4500 Table of Contents Index Assembly 14
Outside Wing Transport
Refer to Figure 13
On outside wings the torque tubes will be the opposite of the
inside wings on the same side. Example: On the left outside
wing you will install a right hand wing torque tube.
 See transport section of “Parts Manual” for proper
parts breakdown for wing walking beam assemblies.
See notes on drawing for proper hole placement on
walking beam spindle and front tube of walking beam.
See “ Tire Inflation Chart ” on page 31, for proper tire
sizes for tire/wheel assembly .
67. Install the walking beam assembly into the wing
torque tube with
5

16
x 4 Gr 8. hex bolt and
5

16
top
lock nut.
68. Align hole in 13.5” spindle/hub assembly to hole in
walking beam assembly secure with
5

16
x 2
13

16
pin clevis and cotter pin. Repeat with 17” spindle/
hub assembly .
69. Mount tire/wheel assembly to spindle/hub
assembly and with
9

16
lug nuts .
 Left hand side is shown. Repeat same procedure for
right side.
70. Tighten all bolts to specs, See “ Torque Values
Chart ” on page 30.
7
6
4
1
3
2
5
6
Figure 13
Outside Wing Transport
43807
5
1
2
3
1
5
4
6
3 4 7