GREAT PLAINS 7323DH Скачать руководство пользователя страница 9

Страница: 9 / 70

Series II Disk Harrow

Table of Contents

Index

Introduction 5

2021-06-10

Table of Contents

Index

556-235Q

Using This Manual

This manual was written to help you assemble and pre

pare the new machine for the customer. The manual

includes instructions for assembly and setup. Read this

manual and follow the recommendations for safe, effi

cient and proper assembly and setup.
An operator’s and parts manual is also provided with the

new machine. Read and understand “

Important Safety

Information

” and “

Operating Instructions

” in the oper

ator’s manual before assembling the machine. Refer to

the parts manual for proper part’s identification. As a ref

erence, keep the operator’s and part’s manual on hand

while assembling.
The information in this manual is current at printing.

Some parts may change to assure top performance.

Definitions

The following terms are used throughout this manual.

A crucial point of information related to the preceding topic.

Read and follow the directions to remain safe, avoid serious

damage to equipment and ensure desired field results.



Useful information related to the preceding topic.

Right-hand and left-hand as used in

this manual are determined by facing

the direction the machine will travel

while in use unless otherwise stated.

An orientation rose in some line art

illustrations shows the directions of: Up,

Back, Left, Down, Front, Right.

Figure 2

Right / Left

43391

Содержание 7323DH







































































Результаты поиска

Содержание 7323DH

Отзывы:

Бренды по названию

Популярные бренды

GREAT PLAINS 7323DH, Руководство по предпродажной подготовке

Результаты поиска

Содержание 7323DH

Отзывы:

Бренды по названию

Популярные бренды