GREAT PLAINS 3S-3000-3210, Руководство оператора

Страница: 81 / 118

3S-3000/F/HD/HDF Table of Contents Index Maintenance and Lubrication 77
2018-06-18 Table of Contents Index 195-441M
Refer to Figure 85 and Figure 86
3. To align the clutch jaws vertically, loosen the two
5 
16
inch bolts at the bottom of the breakaway
clutch bracket , and adjust the bracket as needed.
4. To adjust clutch jaws for full jaw contact, loosen the
two
5

16
inch carriage bolts and slide breakaway
clutch bracket until jaws on the fixed half of clutch
make full contact with jaws on spring loaded half of
clutch without compressing clutch spring.

NOTE:
The two
7 
8
inch hex shafts should have
1 
8
inch
(3.2mm) gap between them when the clutch jaws
have full contact.
Figure 85
Transfer Drive Shaft Gap
18955
2
1
7
7
Figure 86
Transfer Drive Shaft Vertical and Left-Right Adjustment
15621
6
5
7
7
8
9
1
5
6
8
9
7
2