02/22/2019
Table of Contents
202-578B
Great Plains Manufacturing, Inc.
Table of Contents
Introduction
1
Introduction
This manual is your guide to drill adjustments for achiev-
ing specific seed population targets. Although some
setup/adjustment material herein is repeated from the
Operator’s Manual, you need to be thoroughly familiar
with drill operations and adjustments before applying this
Seed Rate manual and its table data.
Products Covered
2SNG24
24ft 2-Section Native Grass Drill, 2007+
2SNG30
30ft 2-Section Native Grass Drill, 2007+
Document Family
202-499M
Operator’s Manual
202-499P
Parts Manual
202-578B
Seed Rate Charts (this manual)
This manual relies on information found only in your
Operator’s Manual. Have both available when preparing
to plant.
Setting Planting Rate
There are four steps to obtaining the desired number of
seeds per acre:
1.
Know the characteristics of the seed.
Consult your seed supplier’s reference documents.
2. Find your settings in the charts:
• Main Seed Box, page 7.
• Small Seeds Box, page 15.
• Native Grass Seeds Box, page 17 (Native Grass
mixes other than Brome require calibration).
3. Set the rate for the seed box in use:
• Main Seed Box, page 2.
• Small Seeds Box, page 11.
• Native Grass Seeds Box, page 17.
4. Check planting rate:
• Main Seed Box, page 5.
• Small Seeds Box, page 13.
• Native Grass Seeds Box, page 17.
The charts are based on original factory tires, and
cleaned, untreated seed of average size and test weight.
Many factors affect field results, including field condi-
tions, foreign material, seed size, seed treatment and tire
pressure. Minor adjustments are likely to be needed.
20160
