GREAT PLAINS 2S-2600 Скачать руководство пользователя страница 60

Страница: 60 / 114

Great Plains

| 195-440M | 2019-05-03

Table of Contents

Index

2S-2600/F/HD/HDF

Table of Contents

Index

Adjustments

00 Row Unit Adjustments

Refer to Figure 56 (which depicts a row unit fully

populated with all optional accessories [except

scraper and Keeton

] supported for use with the

Model 2S-2600/F drills)

From front to back, a 00 Series row unit can include the

following capabilities (some optional):
1. Opener height adjustment: standard

If a few rows need to run deeper, such as in tire

tracks, the arm’s pivot point may be lowered. See

“

Opener Height

” on page 58.

2. Single Down Pressure Spring: standard

Each row unit is mounted on the drill as a pivoting

arm which allows the row unit to independently move

up and down. The adjustable spring provides the

force to get the row unit and attachments into the

soil. See “

Row Unit Down Pressure (Spring)

” on

page 58.

3. Disc Blades: standard, 2 per row unit

Double disc blades open a furrow, creating the seed

bed. Spacers adjust the blades for a clean furrow.

See “

Disk Blade Adjustments

” on page 59.

4. Main seed delivery tube: standard

No adjustments are necessary.

5. Disc Scraper: standard (not shown)

In sticky soils, a scraper helps keep the opener discs

operating freely. A slotted scraper is standard.

A spring-loaded carbide scraper is optional. See

“

Opener Disk Scraper

” on page 93.

6. Seed firmer:

seed flap (not shown) standard:
Seed-Lok

firming wheel (shown)

Improves seed-soil contact. See “

Seed-Lok™ Seed

Firmer Lock-Up

” on page 61.

Keeton

seed firmer (not shown)

Improves seed-soil contact, and provides a stable

arm for a low-rate liquid fertilizer delivery tube. See

“

Keeton Seed Firmer Adjustment

” on page 60.

7. Fertilizer delivery tube: optional

The tube may be reversed to drop fertilizer with the

main seed, or just ahead of the press wheels.

8. Small Seeds delivery tube: optional

The tube may be reversed to drop small seed near

the main seed tube, or just ahead of the press

wheels.
If fertilizer is also installed, the Small Seeds tube is

mounted outside the opener frame.

9. Press wheels: standard (choice of types)

These close the seed trench. The wheels also

support the free end of the row unit, and provide the

primary control over seeding depth. See “

Opener

Depth (Press Wheel Height)

” on page 61.

Equipment Damage Risk:

Do not back up with row units in the ground. To do so will

cause severe damage and row unit plugging.

Figure 56

00 Series Row Unit

34233

Содержание 2S-2600



















































































































Результаты поиска

Содержание 2S-2600

Отзывы:

Похожие инструкции для 2S-2600

Бренды по названию

Популярные бренды

GREAT PLAINS 2S-2600, Руководство оператора

Результаты поиска

Содержание 2S-2600

Отзывы:

Похожие инструкции для 2S-2600

Бренды по названию

Популярные бренды