GREAT PLAINS 2N-2410, Руководство оператора

Страница: 35 / 64

8/2/18 Table of Contents Index 196-126M
2N-2410 & 2N-3010 Table of Contents Index Adjustments 32
Electric Clutch Switch Adjustment
To adjust the height at which seed metering is turned
off, follow these steps.
Refer to Figure 12
1. Locate the height switch at left-hand gauge wheel.
2. Lower the implement until it is at a height where
seeding should start (usually just above the
ground). Securely support frame at this height with
jack stands or blocks.
3. Turn off the tractor and remove the key.
Refer to Figure 13
4. Loosen the cam clamp (1) on the gauge wheel
rockshaft and turn until the switch roller (2) is just
starting to make contact with the ramp surface.
Refer to Figure 14
5. Raise the implement fully and check that the switch
is compressed as shown.
19711
Figure 12
Electric Clutch Switch
15160
Figure 13
14550
Figure 14