4
STEP 1:
Take both side panels (A & B) and insert 4x cam dowels (#1) into the outside holes
on EACH panel.
NOTE:
You will be building this unit face down. To make later steps easier and also to protect
the product during the building process, we suggest laying the polystyrene packing
down on the floor first and building on top of it.
Hardware for Step 1:
8x
#1 Cam Dowels
STEP 2:
Take the two shelf panels C and the star panel D and position them as shown against
the RH side panel A. Ensure the edges of the shelves with the small pilot holes are
facing upwards and the large drill holes on the shelves themselves are facing down
towards the base of the unit. Also check that the large holes on the star panel are
facing up, as shown.
Push the three panels into place using the wooden dowels (#3) and then secure the
shelves by inserting 4x cam locks (#2) and turning clockwise to lock.
A
TOP
BASE
B
#1
#1
#1
#1
BASE
TOP
#1
#1
#1
#1
A
BASE
TOP
C
C
D
6x
#3 Wooden Dowels
Hardware for Step 2:
4x
#2 Cam Locks
#2
#3
#2
#2
#2
#3
#3
#3
#3
#3
