12
STEP 15:
Insert 2x cam locks (#2) into panel F, the arrows on the cam locks should point
towards the hole on the top edge. Now insert 1x cam lock (#2) into panel I, ensuring
the arrow on the cam lock is pointing towards the holes on the top edge.
Now insert 2x wooden dowels in panels C, F and I (6x in total).
STEP 16:
Carefully position panel A over the partial assembled unit. Carefully ensure all of the
cam dowels, wooden dowels and rods fit into the right holes. Turn the cam locks
clockwise to lock on panels C, F and I. To secure the cam locks underneath panel F,
you will need to use a short philips screw driver.
#3
#3
#3
#3
#3
#3
#2
#2
#2
Hardware for Step 15:
6x #3 Wooden Dowels
3x #2 Cam Locks
A
F
I
C
The help of a second
person may make this
step easier.
Turn cam locks 180
degrees or until tight.
Use short Philips Screw
driver when securing cam
locks under panel F.
F
C
I
