4
Hardware for Step 1:
STEP 1:
Take Mid Shelf panel D and attach the magnet catch (#8) using 2x 15mm
screws (#9).
Please note that the position of the magnet catch can be adjusted.
Once the unit is fully built and the doors are on you may need to move the
magnet catch forward or back to make sure the doors are closing properly.
To do this, release the screws, move the catch, then re-tighten.
1x #8 Magnet Catch
2x #9 Screws (15mm)
D
A
#8
#2
#2
#2
#2
#9
STEP 2:
Using a phillips screwdriver, insert 4x Cam dowels (#2) into the outer drill
holes of BOTH panel A and B.
Hardware for Step 2:
8x #2 Cam Dowels
B
#2
#2
#2
#2
