Great Little Trading L5288 Скачать руководство пользователя страница 2

2

Safety Warnings:
 Adult assembly required.
• Unassembled product contains small parts which may present a choking

hazard.

• Children should be kept away from the product during assembly to

avoid any possible risk of injury.

• Assemble and use on a flat and level surface.

• DO NOT use power tools in the assembly of this product as there is a

risk of over-tightening and consequently splitting of the wood.

• To avoid possible injury from tipping, DO NOT allow children to climb on 
the product.

• Maximum shelf weight 10Kgs. Do Not overload.

• WARNING! FURNITURE TIPPING RISK. Serious or fatal crushing

injuries can occur from furniture tipping over. Ensure you secure this

furniture product to the wall before you use it, using the kit provided.

• If you have not received an anti-tip kit with your product please contact

Customer services.

• Wall fixings not included. Please use appropriate fixings that are suitable

for the wall type. If in doubt, please seek professional advice.

• Check all fixtures and fittings regularly and tighten as necessary.

• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Customer Service:
• 

If you find that any components are missing or damaged, please do 
not begin assembly and do not use the item. Please contact GLTC 
Customer Services on 

0344 848 6000 immediately.

• 

We do stock spare hardware packs at our warehouse, so we should be 
able to send you a replacement pack immediately if required.  

Product Care:
• 

Wipe clean using a soft damp cloth followed by a dry cloth.

• 

Do NOT use cleaning products which contain ammonia, solvents or 
abrasive material.

• 

Do NOT expose the item to extremes of heat and humidity.

• 

Regularly check all fastenings, fixtures and fittings to ensure that they 
are properly tightened.

Could we do better? 
If there is anything you think could be improved in these instructions or in 
the assembly of this product we’d be grateful if you could let us know; we’ll 
pass any helpful hints and tips on to other customers via our website and 
update the instructions. 

All you need to do is drop us a line at 

[email protected] 

Thank you

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE 

USED WITH THE WALL ATTACHMENT  DEVICE  PROVIDED.

Please see further information in the assembly manual and on the back panel.

Содержание L5288











Отзывы: