5
STEP 3:
Lay side panels A & B on a protected surface and using a
Phillips screwdriver insert 8x cam dowels (#2) into the
smaller holes on BOTH panels.
STEP 4:
Take panel B and insert 9x wooden dowels (#3) into the remaining holes.
Take the part built panels (D/E/G) and place onto panel B as shown. Ensure the grooved edges
of panels B and E are meeting.
Now take front panel F and orientate with the large drill holes on the inside. Slide this panel
into place over the 2x cam dowels on the angled edge of panel B.
Now take top panel C and orientate so that the upstand is facing up. Connect with panel B and
ensure the groove along the long edge is meeting with the corresponding groove on panel B.
Now, insert 8x cam locks into the large drill holes on panels C, D, E & F that join with panel B
and turn clockwise to secure.
B
B
C
D
F
E
#2
#1
#1
#1
#1
#3
#3
#3
Hardware for Step 4:
8x #1 Cam Locks
9x #3 Wooden Dowels
#1
#1
#3
#3
#3
#3
#3
#3
#1
#1
#2
A
BASE
TOP
G
Hardware for Step 3:
16x #2 Cam Dowels
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
