4
Hardware for Step 1:
1x #1 Cam Dowel
A
B
C
C
#1
#2
#3
#3
#3
#3
x2
1x #2 Cam Lock
5x #3 Wooden Dowels
Hardware for Step 2:
1x #1 Cam Dowel
1x #2 Cam Lock
5x #3 Wooden Dowels
A
#3
#3
#3
#3
x2
#2
#1
STEP 1:
Take 1x panel A and using a Phillips screwdriver, insert 1x cam dowel (#1) into the
hole nearest the top point of the triangular panel. Insert 5x wooden dowels (#3)
into the remaining small holes.
Take central divider panel B and push onto panel A over the hardware, making sure
the large drill hole on panel B goes over the metal dowel.
Insert 1x cam lock (#2) into the larger drill hole and turn clockwise to lock.
Then push BOTH panels C onto the wooden dowels either side of the taller panel.
B
STEP 2:
Take the remaining panel A and using a Phillips screwdriver, insert 1x cam dowel
(#1) into the hole nearest the top point of the triangular panel. Insert 5x wooden
dowels (#3) into the remaining small holes.
Now position this on top of the divider panels and push into place.
Insert 1x cam lock (#2) into the remaining drill hole on panel B and turn
clockwise to lock.
