6
2x #3 Wooden Dowels
Hardware for Step 3:
Hardware for Step 4:
4x #2 Cam Locks
6x #2 Cam Locks
C
C
I
D
B
E
F
B
#4
#3
#5
#3
#5
#4
#2
#1
#1
#2
#1
#2
#1
#2
#2
#1
#1
#2
#2
#2
#2
#2
2x #5 Barrel Nuts
2x #4 Bolts 85mmL
STEP 3:
With the help of a second person, stand up LH side panel (B) and slot upper cross
bar (E ) to the cam dowels at the top and affix with x2 cam locks (#2) from the inside.
Next slot lower cross bar (F) to the bottom of panel (B) using x1 wooden dowel (#3)
and insert x1 barrel nut (#5) on the back facing side of panel (F) and secure with x1
bolt (#4) through panel (B) using the allen key.
Next insert x1 wooden dowel (#3) to the lower cross rail (F) and slot central diver
panel C to the cross rail panels. Secure upper cross rail panel (E) with x2 cam locks
(#2) and insert x1 barrel nut (#5) to panel (F) and secure with x1 bolt (#4) using the
allen key.
STEP 4:
Carefully lower the desk so that the back of the desk to the floor. Insert x6 cam
dowels (#1) to the bottom of panels C and D. Slot in panel I to panel C ensuring the
cut out corner is on the front facing side and the grooved side is at the back, then
connect with side panel D. Secure the cam dowels by inserting x6 cam locks (#2) to
the hardware holes on the underside of panel I and turn clockwise.
6x #1 Cam Dowels
