4
#2
#2
#3
#2
#3
A
B
STEP 2:
Insert 2x wooden dowels (#2) into the holes next to the cam dowel
on panel (A).
Now, take divider panel (B) and connect to base panel (A) with the
larger drill holes as shown.
Please note that the 3 drill holes on the edge of divider panel (B) must
be facing up and at the end that is connecting with base panel (A). If it
is not the case, it is in the wrong position.
When in place, insert 1x cam lock (#3) into the large hole on panel
(B) and turn clockwise to secure
.
Hardware for Step 2:
2x #2 Wooden Dowels
1x #3 Cam Lock
Hardware for Step 3:
2x #1 Cam Dowels
#1
#1
#1
C
STEP 3:
Using a Philips screwdriver, prepare front
panel (C) by inserting 2x cam dowels
(#1) on the edge of the panel into the
inner holes as shown.
STEP 4:
Now, insert 4x wooden dowels (#2) into the remaining smaller holes on front
panel (C) as shown.
Then, take the assembled panels (A) and (B) and connect to front panel (C) with
the larger drill holes as shown.
When in place, insert 2x cam locks (#3) into the 2 large holes on panel (A) and
turn clockwise to secure.
C
B
#2
#2
#2
#2
#2
#3
#3
A
Hardware for Step 4:
4x #2 Wooden Dowels
2x #3 Cam Locks
Using Cam Locks:
When inserting into
the panel, ensure that
each cam lock’s arrow is
pointing towards the drill
hole on the side edge of
the panel & the dowel that
it will be receiving.
When the panels are in
the connected position,
using a screwdriver,
turn the cam lock in a
clockwise direction to lock
and secure.
