4
Hardware for Step 1:
STEP 1:
Working on a protective surface, prepare the base panels.
Lay front panel D on the floor with the drill holes facing up and insert 2x cam
dowels (#2) into the outer holes using a Phillips screwdriver.
2x #2 Cam Dowels
D
F
#2
#1
#1
#4
Hardware for Step 2:
2x #1Cam Locks (12mmH)
2x #4 Wooden Dowels
#4
Using Cam Locks:
When inserting into the panel, ensure
that each cam lock’s arrow is pointing
towards the drill hole on the side
edge of the panel & the dowel that it
will be receiving.
When the panels are in the connected
position, using a screwdriver, turn the
cam lock in a clockwise direction to
lock and secure.
D
#2
#2
STEP 2:
Insert 2x wooden dowels (#4) into the inner holes on panel D, then connect
base panel F with panel D as shown.
Once in position, insert 2x cam locks (#1) into the large drill holes as shown
and turn clockwise to secure.
