6
STEP 3:
Connect both pairs of legs using panel E. Turn both cam locks (#2) clockwise to
secure.
Ensure all hardware is facing inwards as shown.
STEP 4:
Attaching the legs to the desk storage.
Begin with inserting the 4 x threaded bolts (#9) directly into the 4 legs. Fully tighten
these bolts using the Allen key provided. It is important that they are tightened fully.
The remaining four bolts (#9) need corresponding barrel nuts (#8) to hold them in
place. Again, it is important that they are tightened fully.
Please note, panel F must be positioned with the larger drill holes facing away from
the legs. The hardware (#9) must insert into the larger holes and must be tightened
fully so that each bolt head is recessed into the panel as they will not be accessible
after this step.
This step can also be completed with the legs set upright on the floor and panel F
placed on top of them.
E
2x
#3 Wooden Dowels
Hardware for Step 3:
2x
#2 Cam Locks
Hardware for Step 4:
4x
#8 Barrel Nuts
8x
#9 Bolts
#2
#2
#3
#3
#9
#9
#9
#9
#9
#9
#9
#9
#8
#8
#8
#8
F
NOTE:
Please be aware that when assembling the legs to
panels D and E you may notice that the legs remain
loose after the cam locks have been tightened. These
will be secured during the next step.
