3
Component Check List
Hardware Check List
A
B
C
4x Legs
1x Seat
1x Seat Back
1x Bolt
53mmL
1x Flat Washer
1x Allen Key
1x Spanner
1x Nut
4x Plastic Washers
#1
#4
#2
#2
#5
#3
#6
STEP 1:
Working on a protected/carpeted surface to prevent damage to your chair,
take the seat panel (A) and turn it over so that the 4 wooden blocks are facing
up.
Thread a plastic washer (#2) over the end of the threaded rod of one leg (B)
and insert into the wooden block. Turn the leg with your hands and FULLY
tighten.
Repeat with remaining 3 legs (B).
Ensure all legs are fully tightened before standing the chair onto its feet.
Hardware for Step 1:
4x #2 Plastic Washers
A
B
B
B
B
