4
STEP 2:
Using a Phillips screwdriver, prepare the top shelf side panels by inserting 3x
cam dowels (#1) into the smaller holes of BOTH panels D & C.
Hardware for Step 2:
Hardware for Step 1:
STEP 1:
Build the Top Shelf first.
Take panel A and position with the large drill holes on the floor. Insert 1x cam
dowel (#1) in the central hole shown using a Phillips screwdriver and push 2x
wooden dowels (#2) in the remaining holes.
Take panel B and push onto the dowels, making sure the large drill holes are
facing outwards. (this will ensure they are not seen once the unit is finished.)
Insert 1x cam lock (#3) into the central hole of Panel B and turn clockwise to
secure.
2x #2 Wooden Dowels
A
B
#2
#2
#1
#3
#1
#2
#3
1x #1 Cam Dowel
1x #3 Cam Lock
D
C
#1
#1 #1
#1
#1
#1 #1
6x #1 Cam Dowels
IMPORTANT: Make sure that the
small drill holes on the edge of
panel A are next to the connection
to panel B - they will be needed at
a later step.
Using Cam Locks:
When inserting into the panel, ensure that each cam lock’s
arrow is pointing towards the drill hole on the side edge
of the panel & the dowel that it will be receiving.
When the panels are in the connected position, using a
screwdriver, turn the cam lock in a clockwise direction to
lock and secure.
