5
D
C
#1
#2
Hardware for Step 1:
Hardware for Step 2:
2x #2 Wooden Dowels
7x #1 Cam Dowels
4x #3 Cam Locks
2x #5
Double Ended
Cam Dowels
Using Cam Locks:
When inserting into the panel, ensure that each cam lock’s
arrow is pointing towards the drill hole on the side edge of
the panel & the dowel that it will be receiving.
When the panels are in the connected position, using a
screwdriver, turn the cam lock in a clockwise direction to
lock and secure.
STEP 1:
Take top shelf panels A & B and position with large drill holes facing up and the
angled edges next to each other as shown.
Insert 2x wooden dowels (#2) into the inner holes on the angled edge of panel A.
Insert 2x double ended cam dowels into the outer holes on the edge of the same
panel.
Insert 2x cam locks into the large drill holes on the same panel and turn clockwise to
lock.
Pull the ends of cam dowels out a little.
Now push the two panels together and insert 2x cam locks (#3) into the large drill
holes on panel B and turn clockwise to lock.
STEP 2:
Using a Phillips screwdriver, prepare the top shelf side panels by inserting 3x cam
dowels (#1) into the smaller holes of BOTH panels D & C.
Then insert 1x cam dowel (#1) into the end of panel E.
A
B
#3
#3
#3
#3
#1 #1
#1
#1
#1
#1
#5
#5
#2
#2
D
C
#1
E
#1
