5
STEP 3:
Take panel A and insert 4x wooden dowels (#2) into the holes at the edges
of the panel as shown. Position with the grooved edge on the floor and the
protruding end pointing in the same direction as the large drill holes on the
underside of panels C & D (towards the base).
Connect the C/D/E panel framework with the side panel.
Insert 2x cam locks (#3) into the large drill holes on BOTH panels C & D and
turn clockwise to secure.
STEP 4:
Repeat step 3 to fix side panel B, again ensuring the panel is positioned with the
grooved edge on the floor and the protruding end pointing in the same direction
as the large drill holes on the underside of panels C & D (towards the base).
Ensure all cam locks are tightened fully.
#2
#3
#2
#2
#2
#3
#3
#3
#3
#2
4x #3 Cam Locks
Hardware for Step 3:
4x #2 Wooden Dowels
A
C
D
E
#2
#2
#2
#2
#3
#3
#3
#3
B
4x #3 Cam Locks
Hardware for Step 4:
4x #2 Wooden Dowels
#2
Using Cam Locks:
When inserting into the panel, ensure that each cam lock’s arrow
is pointing towards the drill hole on the side edge of the panel
& the dowel that it will be receiving. When the panels are in the
connected position, using a screwdriver, turn the cam lock in a
clockwise direction to lock and secure.
TOP
BASE
TOP
BASE
