5
OPERATING DOOR HANDLE
The door swing handles have been installed and no additional assembly
is required. To operate the swing handle, lift up at the bottom of the
handle to open. Swing the handle
to the left or right to open.
The handle must be kept
in this position to close
the door. Return the handle
to the initial position
and use the key provided
to lock the handle. The
lock on the side panels
will accept the same key.
The swing handles and
doors are reversible. The
exploded view shows its
construction.
OPERATING DOOR SWING HANDLE
OPERATING DOOR SWING HANDLE
INTERCHANGING DOOR HANDLES
Door handles on all doors can be interchanged with any one of Great
Lakes optional swing handles: CH-02 (three-digit combination lock
and key); CH-03 (padlock with key lock); or CH-04 (padlock). When
interchanging the handle, the type of door will determine the type of
cam that is required to properly install the handle; when ordering the
handle, Great Lakes will determine if additional cams are required.
(1
.0
0)
TH
K
(1
.0
0)
TH
K
ASSEMBLY OF SWING-LATCH HANDLE ON CONTOUR MESH DOOR
Deeper cam
required on contour
mesh doors with
Swing-latch
Swing-latch
handle
without cam;
pull out and
rotate to open
and close
FRONT
DETAIL
SIDE
DETAIL
CROSS
VEIW
(1
.0
0)
TH
K