8
ToP PaneL MounTinG
The top panel of the enclosure is
installed at the manufacturer.
Removing the top panel can
be done by removing the four
#10-32 x 1/2" lg screws.
Then simply lift the top
panel out or off.
tPeS-S tPeS-P tPeS-f tPeS-f10 tPeS-2f10 tPeS-b
Solid
Perforated
three, one, 10" 550 two, 10" 550 Grommet
Standard
75 Cfm fans Cfm fan
Cfm fans
brush
There are 6 top panel options (The TPES-S Solid Top Panel is standard)
for the EZ Enclsoure:
A
RaiL adJuSTMenT
The EZ enclosure comes standard with 19" 310-E compliant, 3/8"
SQ hole mounting rails. These rails are fully adjustable front to back.
To adjust rails, loosen the ¼-20 hardware using a 3/8" socket and
slide them to the desired position. (There are "tabs" in the horizontal
mounting brackets – if adjustment is required past these tabs, loosen
and remove the hardware then reinstall)
A
B
A
B
A
B
1/4 - 20 Locking
Flange Nut
1/4 - 20
Carrige Bolt
top & bottom rail mounting
Center rail mounting
1/4 - 20 Sliding
Nut Plate
1/4 - 20 Hex
Head Bolt
#10-32 x 1/2"
Pan Head
Screws
