Grease Guardian GGX15, Установка, эксплуатация и обслуживание

Страница: 12 / 32

12
GReAse GUARdiAn contRolleR
cycle programming
Initial Note: if no user adjustments are made a
factory setting from 8am-12pm starts the unit on
a LOW cycle daily. This is adequate for smaller
applications including out of town delis, or small
restaurants. Refer to appendix 1 at back of this
manual for recommended settings for your
application.
After machine switch-on, the home screen
appears displaying the controller software
version (in this case U for USA and version date
ddmmyy). The current time of day, and cycle
mode are also displayed. The unit displays
“Standby” when not in cycle.
To change a cycle first choose from one or more
of the 4 hour programs 08:00-12:00, 12:00-
16:00, 16:00-20:00, and 20:00–00:00, accessed
by pressing the
ok
and
A
buttons together.
Then advance through the time slots available by
re-pressing
A
.
Any time-slot can be set to ON/OFF by pressing
the
b
button. On completion press
esc
to return
to the home Screen.
Finally in the home screen press and hold either
the + or - keys for 1 second to fine tune the cycle
duration. The display will indicate the adjustment
made from 3 options:
• low cycle Mode
• MediUM cycle Mode
• HiGH cycle Mode
See Appendix 1 for suggested example settings for your application.