background image

other nearby radio or TV sets are turned on near the scanner. 
Use the TUNE function and scan every frequency range from its 
lowest frequency to the highest. Occasionally, the searching will 
stop as if it had found a signal, often without any sound. This is a 
birdie. Make a list of all the birdies in your scanner for future 
reference.

Care

Keep the scanner dry; if it gets wet, wipe it dry immediately. Use 
and store the scanner only in normal temperature environments. 
Handle the scanner carefully; do not drop it. Keep the scanner 
away from dust and dirt, and wipe it with a damp cloth 
occasionally to keep it looking new.

Modifying or tampering with the scanner

ʼ

s internal components 

can cause a malfunction and might invalidate its warranty and 
void your FCC authorization to operate it.

In Case of Fault

If you believe your scanner is defective, you should contact your 
dealer for assistance. However, before you do so, check that the 
fault was caused by a human error. Carefully reread the relevant 
section in the Owners Manual.

PSR-500 User Manual

Page 

95

Содержание PSR-500











































































































































Отзывы: