manualshive.com logo in svg

GRE PSR-100, Руководство пользователя

Поделиться
Скачать
GRE PSR-100 Скачать руководство пользователя страница 23

23

4. Use the number keys to enter the desired FIPS code, and then press 

ENT

 to

store the code. Repeat this process for all the FIPS codes that you wish to

store.

5. Press 

L/OUT

 to lock out or enable specific FIPS entries.

6. Press 

WX

 to exit the FIPS code entry table. The scanner displays 

F

 at the left

hand if you enter the FIPS code(s).

Notes:

• Your scanner can also detect the 1050 Hz weather alert tone when a weather

channel is set as the priority channel and weather priority operation is en-

abled (see “Priority”). In this mode all alerts are received. FIPS settings are

ignored.

• The scanner sounds an alert or beep when it receives the SAME code. If you

do not stop the alert (or beep) for five minutes, the alert stops and the scan-

ner beeps every ten seconds. If the scanner receives a new message after

five minutes, it sounds the alert or beep. To stop the sound and ready the

scanner to receive a new alert signal before the five minute time out, press

any key except 

LIGHT

.

7. Press 

PRI/ALERT

 to initiate SAME standby. The scanner will monitor the all

weather radio station for alerts with FIPS codes that match the codes you

entered in the FIPS entry table. To exit SAME standby, press 

PRI/ALERT

again.

Note:

 In the SAME Standby mode, the scanner receives all alert/warning

messages for receivable areas if you do not enter the FIPS code.

Skywarn

Many areas of the country have amateur radio repeaters that have been desig-

nated as “Skywarn” repeaters. During times of severe weather, these repeat-

ers are used to relay reports of severe weather directly to meteorologists at a

local National Weather Service (NWS) forecast office. Using the Skywarn fea-

ture in your scanner, you can easily jump to Skywarn repeater frequencies and

monitor these reports, in many cases hearing about severe weather in your

area instantly as it occurs.
This function lets you quickly move to the skywarn channels (Channel 200)

from any mode by pressing and holding WX about 2 seconds. The scanner

displays SKYWARN symbol.

Note:

 To activate this function, you must program your desired Skywarn fre-

quency into the Skywarn channel.

Содержание PSR-100





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды