@AWT USER MANUAL
6
4. To move to next parameter press the key.
5. To exit and return to normal weighing press the key.
UF-2
High / Low limits setting
1. Press the key to enter.
2. The display will show
00.000L
(set low limit).
3. Use the key to move cursor and press the to select number.
4. Press the key to confirm.
5. The display will show
00.000H
(set high limit).
6. Use the key to move cursor and press the to select number.
7. Press the key to confirm.
8. The display will show
o .000
,look at the remarks below.
9. Use the key to move cursor and press the to select number.
10. Press the key to confirm.
Remarks:
0 0 0
A B C
A --- Buzzer on: 0= Stable not required 1= Stable required
B
–- LED indicator: 0= Stable not required 1= Stable required
C : Buzzer beeps when: 0= Buzzer off 1= OK 2= LO and HI
Low limit set as 0 will clear all check weigh values.
UF-3
Auto-power off
Modes:
AoFF00
:Auto-turn off disable.
AoFF01
: The balance will automatically turn off after 1 minute of non use.
This time can be set up to 99 minutes.
1. Press the key to access to auto-power configuration.
2. Use the key to move cursor and press the to select number.
All manuals and user guides at all-guides.com