Gravely Compact-Pro 34 991088, Руководство оператора

Страница: 24 / 38

EN - 22
Remove Ground Drive Belt
See Figure 22.
1. Remove the PTO belt from the mower
clutch sheave. See Remove PTO Belt on
page 21.
2. Slowly release the tension on the hydro
pump belt idler until all the tension is
removed from the springs.
3. Remove old hydro pump belt from right
hand hydrostat sheave first.
4. Install new hydro pump belt by positioning
belt on sheaves. Put belt onto right hand
hydrostat sheave last.
5. Replace long mower belt on mower
clutch sheave. See Remove PTO Belt on
page 21.
ADJUST SEAT
1. While seated, pull seat adjustment lever
outward and slide seat into desired
position.
2. Release lever and slide seat forward or
back to lock seat into position.
ADJUST STEERING LEVERS
Adjust Steering Lever Height
See Figure 23.
1. Shut OFF engine. Engage parking brake.
Remove the ignition key.
2. Remove the spacer, handle, and
eccentric spacer from the steering lever.
NOTICE: Position the right and left handles at
the same height position.
3. Install the spacer, handle, and eccentric
spacer in the appropriate height position.
Do not tighten the nut holding the
eccentric spacer.
Figure 22
1. Hydro Belt
2. Spring
3. Idler
4. Engine Sheave
5. Right Hand Hydrostat
6. Left Hand Hydrostat
7. Clutch
8. Clutch Anchor
1
2
6
5
3
4
7
8
ADJUSTMENTS
WARNING: AVOID INJURY.
Read and understand the Safety
section before proceeding.
Figure 23
1. Spacer
2. Handle
3. Eccentric Spacer
4. Steering Lever
1
2
4
3
Position 1
Position 2
Position 3