EN - 23
FOR BEST PERFORMANCE
•
Cut grass when it is dry.
•
Keep mower blades sharp.
•
Keep mower deck properly leveled.
•
Adjust anti-scalp rollers to prevent
scalping.
•
Do not set height of cut too low. For
very tall grass, mow twice.
•
Do not travel too fast.
•
Mow with the engine set at full throttle.
•
When mulching, only remove 1/3 of
grass length per cutting. Do not cut
more than 1" (2.5 cm) at any one time.
•
Discharge clippings into areas already
cut.
•
Vary cutting pattern with each mowing.
•
Do not allow grass or debris to collect
inside of mower deck. Clean after
each use.
Proper maintenance can prolong the life of
unit. The following charts show the
recommended service schedule. More
frequent service may be required due to
extreme working conditions (heavy loads,
high ambient temperatures, dusty conditions,
or airborne debris).
See the maintenance instructions in the
Engine Manual for additional information.
Figure 7
Bypass Position
Run Position
MAINTENANCE SCHEDULE
WARNING:
AVOID INJURY.
Read and understand entire
Safety
section before proceeding.
Period
Service
Task
Each Use
Check Safety Interlock
WARNING:
Safety interlock system failure
and improper operation of unit can result in
death or serious injury. Test this system each
time the unit is operated. If this system does
not function as described, do not operate
until repairs are made. See
Check Parking Brake
Interlock System
Parking Brake Interlock System
Check Hydraulic Fluid
Check hydraulic oil level mark on expansion tank. Add
15W-50 synthetic motor oil (Gravely p/n 00057100) or
equivalent as needed. Do not overfill. See
