Gravely 992042 19HP PM144Z Скачать руководство пользователя страница 9

GB - 9

DO NOT transport machine while engine is running. 

ALWAYS turn off power to attachment and shut off fuel when 
transporting unit.

Keep unit free of debris. Clean up oil or fuel spills.

This product is equipped with an internal combustion type 
engine. DO NOT use unit on or near any unimproved, 
forest-covered or brush covered land unless exhaust system 
is equipped with a spark arrester meeting applicable local, 
state or federal laws. A spark arrester, if it is used, must be 
maintained in effective working order by operator.

Fuel is highly flammable and its vapors are explosive. 
Handle with care. Use an approved fuel container.

NO smoking, NO sparks, NO flames. ALWAYS allow engine 
to cool before servicing.

NEVER fill fuel tank when engine is running or hot from 
operation.

NEVER fill or drain fuel tank indoors.

Replace fuel cap securely and clean up spilled fuel.

Never fill containers inside a vehicle or on a truck or trailer 
bed with a plastic liner. Always place containers on the 
ground away from your vehicle before filling.

When practical, remove gas-powered equipment from the 
truck or trailer and refuel it on the ground. If this is not 
possible, then refuel such equipment on a trailer with a 
portable container, rather than from a gasoline dispenser 
nozzle.

Keep the nozzle in contact with the rim of the fuel tank or 
container opening at all times until fueling is complete. Do 
not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing immediately.

Avoid Electric Shock. Objects contacting both battery 
terminals at the same time may result in injury and unit 
damage. DO NOT reverse battery connections.

Reverse connections may result in sparks which can cause 
serious injury. Always connect positive (+) lead of charger to 
positive (+) terminal, and negative (-) lead to negative (-) 
terminal.

ALWAYS disconnect negative (-) cable FIRST and positive 
(+) cable SECOND. ALWAYS connect positive (+) cable 
FIRST, and negative (-) cable SECOND.

Explosive Gases from battery can cause death or serious 
injury. Poisonous battery fluid contains sulfuric acid and its 
contact with skin, eyes or clothing can cause severe 
chemical burns.

No flames, No sparks, No smoking near battery.

ALWAYS wear safety glasses and protective gear near 
battery. Use insulated tools.

DO NOT TIP battery beyond a 45° angle in any direction.

ALWAYS keep batteries out of reach of children.

Battery posts, terminals and related accessories contain 
lead and lead compounds, chemicals known to the State of 
California to cause cancer and reproductive harm. Wash 
hands after handling.

ALWAYS block wheels and know all jack stands are strong 
and secure and will hold weight of unit during maintenance.

Release pressure slowly from components with stored 
energy.

NEVER attempt to make any adjustments to unit while 
engine is running (except where specifically recommended). 
Stop engine, remove key or spark plug wire and wait for all 
moving parts to stop before servicing or cleaning.

Check parking brake operation frequently. Adjust and 
service as required.

ALWAYS maintain unit in safe operating condition. Damaged 
or worn out muffler can cause fire or explosion.

Maintain or replace safety and instruction labels, as 
necessary.

NEVER store unit with fuel in fuel tank, inside a building 
where any ignition sources are present.

Shut off fuel and allow engine to cool completely before 
storing in closed area or covering unit.

Clean grass and debris from unit, especially from around 
muffler and engine, to help prevent fires.

For extended storage, shut off fuel and clean unit thoroughly. 
See engine manual for proper storage.

Lower cutting deck unless a positive mechanical lock is 
used.

Use only attachments or accessories designed for your unit. 

Check all hardware at regular intervals, especially blade 
attachment bolts. Keep all hardware properly tightened.

Check attachment components frequently. If worn or 
damaged, replace with manufacturer’s recommended parts.

Содержание 992042 19HP PM144Z

































Отзывы: