Gravely 927060 - 1028 Скачать руководство пользователя страница 3

 

GB - 3

 

DELIVERY

 

Customer Note:

 

 If you have purchased this 

product without complete assembly and 
instruction by your retailer, it is your 
responsibility to:

• Read and understand all assembly 

instructions in this manual. If you do not 
understand or have difficulty following the 
instructions, contact your nearest Ariens 
Dealer for assistance. 

 

NOTE: 

 

To locate your nearest Gravely Dealer, 

call 1-800-472-8359 or go to www.gravely.com 
on the internet.

 

Before attempting to operate your 
unit:

 

1. Make sure all assembly has been 

properly completed.

2. Understand all Safety Precautions 

provided in the manuals.

3. Review control functions and operation of 

the unit. Do not operate the unit unless all 
controls function as described in this 
manual.

4. Review recommended lubrication, 

maintenance and adjustments.

5. Review Limited Warranty Policy.
6. Fill out a Product Registration Card and 

return the card to the Ariens Company or 
go to www.gravely.com.

 

DISCLAIMER 

 

Gravely reserves the right to discontinue, 
change, and improve its products at any time 
without notice or obligation to the purchaser. 
The descriptions and specifications contained 
in this manual were in effect at printing. 
Equipment described within this manual may 
be optional. Some illustrations may not be 
applicable to your unit.

 

SAFETY ALERTS

 

The safety alert symbol is used in decals and 
with this manual. Understand the safety 
message. It contains important information 
about personal safety.

 

NOTATIONS

 

NOTE: 

 

 General reference information for 

proper operation and maintenance practices.

 

IMPORTANT: 

 

Specific procedures or 

information required to prevent damage to unit 
or attachment.

 

SAFETY DECALS AND 
LOCATIONS

 

ALWAYS replace missing or damaged Safety 
Decals. Refer to figure 2 for Safety Decal 
locations.

 

WARNING: 

 

Improper assembly or 

adjustments can cause serious injury. 

 

SAFETY

 

WARNING: 

 

This cutting machine is 

capable of amputating hands and feet 
and throwing objects. Failure to 
observe the safety instructions in the 
manuals and on decals could result in 
serious injury or death.
Slopes are a major factor related to 
loss-of-control and tip-over accidents. 
Operation on all slopes requires extra 
caution.
Tragic accidents can occur if the 
operator is not alert to the presence of 
children. Never assume that children 
will remain where you last saw them.
Gasoline is extremely flammable and 
the vapors are explosive, handle with 
care.
Disengage attachment, stop unit and 
engine, remove key, engage parking 
brake, and allow moving parts to stop 
before leaving operator’s position.

Look for these symbols to point 
out important safety 
precautions. They mean:

 

• Attention!
• Personal Safety Is 

Involved!

• Become Alert! 
• Obey The  Message!

 

DANGER: 

 

IMMINENTLY 

HAZARDOUS SITUATION! If not 
avoided, WILL RESULT in death or 
serious injury.

 

WARNING: 

 

POTENTIALLY 

HAZARDOUS SITUATION! If not 
avoided, COULD RESULT in death or 
serious injury.

 

CAUTION: 

 

POTENTIALLY 

HAZARDOUS SITUATION! If not 
avoided, MAY RESULT in minor or 
moderate injury. It may also be used 
to alert against unsafe practices.

Содержание 927060 - 1028




























Отзывы: