background image

GB - 3

Before attempting to operate your 
unit:

1. Make sure all assembly has been 

properly completed.

2. Understand all Safety Precautions 

provided in the manuals.

3. Review control functions and operation 

of the unit. Do not operate the unit 
unless all controls function as described 
in this manual.

4. Review recommended lubrication, 

maintenance and adjustments.

5. Review Limited Warranty Policy.

6. Fill out a product registration card and 

return the card to the Gravely Company 
or go to www.gravely.com.

DISCLAIMER 

Gravely reserves the right to discontinue, 
change, and improve its products at any time 
without notice or obligation to the purchaser. 
The descriptions and specifications 
contained in this manual were in effect at 
printing. Equipment described within this 
manual may be optional. Some illustrations 
may not be applicable to your unit.

SAFETY ALERTS

The safety alert symbol is used in decals and 
with this manual. Understand the safety 
message. It contains important information 
about personal safety.

NOTATIONS

NOTE:  General reference information for 
proper operation and maintenance practices.
IMPORTANT: Specific procedures or 
information required to prevent damage to 
unit or attachment.

SAFETY DECALS AND 
LOCATIONS

ALWAYS replace missing or damaged Safety 
Decals. Refer to figure 2 for Safety Decal 
locations.

1. Caution!

SAFETY

WARNING: This cutting machine is 
capable of amputating hands and 
feet and throwing objects. Failure to 
observe the safety instructions in the 
manuals and on decals could result 
in serious injury or death.
Slopes are a major factor related to 
loss-of-control and tip-over accidents. 
Operation on all slopes requires extra 
caution.
Tragic accidents can occur if the 
operator is not alert to the presence 
of children. Never assume that 
children will remain where you last 
saw them.
Gasoline is extremely flammable and 
the vapors are explosive, handle with 
care.
Disengage attachment, stop unit and 
engine, remove key, engage parking 
brake, and allow moving parts to stop 
before leaving operator’s position.

Look for these symbols to point 
out important safety 
precautions. They mean:

• Attention!
• Personal Safety Is 

Involved!

• Become Alert! 
• Obey The Message!

DANGER: IMMINENTLY 
HAZARDOUS SITUATION! If not 
avoided, WILL RESULT in death or 
serious injury.

WARNING: POTENTIALLY 
HAZARDOUS SITUATION! If not 
avoided, COULD RESULT in death or 
serious injury.

CAUTION: POTENTIALLY 
HAZARDOUS SITUATION! If not 
avoided, MAY RESULT in minor or 
moderate injury. It may also be used 
to alert against unsafe practices.

• Maximum Tongue weight: 30 lbs.
• Maximum Trailer weight: 300 lbs.
• Do not use hitch with bagger attached.
• Do not use on steep hills or slopes.
• Do not park on hills when trailer is 

attached.

• Do not use with any ground engaging 

equipment.

Содержание 915042































Отзывы: