4. Press the "up" or "down" buton to select the
desired time in seconds.
P2 is displayed on the control panel.
5. Press the SET buton again to select the
temperature unit.
P3 is displayed on the control panel.
Now you can set whether the temperature
should be displayed in °C or °F. Use the "up" or
"down" butons again.
6. Press the SET buton again to set when the
Press should switch off automatically.
P4 is displayed on the control panel.
The device switches off the heating function
automatically after the set time has elapsed.
You can switch on the heating function again by
pressing any buton on the control panel. The
machine switches on again with the previously
set parameters.
You can also skip this procedure by pressing the
SET buton.
7. Press the SET buton again. You will return to
the main mode. The heating plates are now
heated.
Unit Overview and Operations
Page 26.1
1
