Before using the device, please check the machine's technical data. The right
voltage is 220-240V/50Hz (See the section "Technical characteristics of the
product").
Insert the power plug into the unit. Insert such plug into the power outlet.
Turn on the power supply connection cable of the press by using the On/Off
switch. The control panel will light up now.
Unit Overview and Operations
Page 26
ATTENTION! Please make sure that the
pressure release screw is completely
closed! Otherwise the cylinder cannot
hold the pressure!
Do NOT unscrew the pressure release
screw completely! To open the plates it is
sufficient to open the screw with half a
turn. The cylinder can lose oil if the screw
is turned out too far.
After opening the plates, make sure that
the screw is completely closed again.
