GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 04/2007
29
Order No.
9371
INSTRUCTIONS
WILGA 2000
For electric power and three Li-Po cells
This model requires a four-function radio control system
Specification
Wingspan approx.
1060 mm
Fuselage length excl. spinner approx.
845 mm
Total surface area approx.
54.5 dm²
All-up weight according to
fittings approx.
540 g
Longitudinal dihedral
approx. 0.5°
CG position, measured from
wing root leading edge
approx. 63 mm
Introduction
The GRAUPNER WILGA 2000 is a good-looking
ultra-lightweight
aerobatic
trainer. At the development stage we placed great emphasis on low all-up weight,
and this is reflected in the aeroplane’s excellent flying characteristics and
performance. The handling of the WILGA 2000 makes it the ideal first “full-house”
model aircraft, as it is capable of simple aerobatics. The selected wing section
endows the model with very good-natured, neutral flying characteristics. The
aircraft is built primarily of high-density foam, while the wing is fitted with a carbon
fibre spar.
The two-part wing makes the model easy to transport. Completing the machine
only involves a few procedures, such as installing the fin. The tailplane is
attached to the fuselage using two pan-head self-tapping screws.
A four-function RC system is quite sufficient to fly this model.
Caution:
this model is not a toy!
If you are a beginner to this type of powered model, please ask an experienced
model flyer for help and support. If you attempt to operate the model without knowing
what you are doing, you could easily injure yourself or somebody else. Please keep
your safety and well-being in mind at all times.
Important Safety Notes
