46
15. Screen displays
Capacity in mAh
Output 3
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
M a n . 1 2 : 5 6 0 0 3 2 1
0 0 0 0 m A h 0 0 0 0 m A h
Program
Output 1
Charge / discharge time
(min.:sec.) Output 1
Capacity in mAh
Output 1
The two-line liquid-crystal screen displays in a clear form the important information generated during the
charge / discharge process. The information remains visible on-screen until you disconnect the battery
that is being charged. Once you connect another battery for charging, the previously displayed values
are erased, and cannot be called up again.
16. On-screen monitor displays
The ULTRA TRIO PLUS 16 incorporates a wide range of protective and monitoring systems designed
to check the charger’s functions and monitor the state of its electronics. If any of the unit’s critical limit
values is exceeded, the charge process is switched off. Typical triggers would be excessive voltage,
excessive temperature or a depleted car battery.
If any of these problems should occur, the liquid crystal screen displays the cause of the error, and the
buzzer sounds to alert you.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
B A T T E R Y C H E C K
W A I T P L E A S E . . .
Measuring process
When you hold the START button pressed in for about two
seconds, the charger measures the battery connected to it.
This message appears on the screen for one or two seconds
before the charge process is initiated.
Capacity in mAh
Output 2
Current in A
Output 3
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
R e s
. 2
5
m
+ 1.
0 0 A
+ 1.
0 0 A
Internal resistance in mOhm
Output 1
Current in A
Output 2
Battery Type and
battery voltage in V
Output 3
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
L P + 4 . 0 0 A 1 2 . 3 4 5 V
L P 1 2 . 4 V N M 0 5 . 4 V
Battery Type
Output 1
Current in A Output 1
Battery voltage in V
Output 1
Battery Type and
battery voltage in V
Output 2
