GRAUPNER Udaloy Class Destroyer Admiral Panteleyev, Руководство пользователя

Страница: 5 / 7

Page 5 of 7
Unpacking
Connections
The Udaloy Class Destroyer comes in a large and heavy box. If you
notice any outside damage to the box, please refuse the package
for return to our warehouse. We cannot replace or return the product
after acceptance under any condition!
NOTE
After unwrapping the protective shipping wraps and straps have
someone assist you with opening the box and lifting the model out
of the box. Do not attempt to do this by yourself as damage to the
model may occur!
Before lifting the model out of the box locate the boat stand parts on
the side of the box where it usually sits between the packaging foam
and the cardboard and assemble it.
Carefully lift the model out of the box and place it on the boat stand.
Make sure that there is plenty of clear space around the boat stand
before placing to model on it.
The model superstructure and hull are strapped together for shipping
purposes. The straps need to be removed by carefully cutting them
until all straps have been removed.
Each of the superstructures of the Udaloy can be removed for
access to the electronics. The superstructures are already wired to
the radar motors and navigation lights. A single wire with a JST
connector powers both the motors and lights and is connected to a
power wire extender with JST plugs that connects to the electrical
switching module.
NOTE
The operating voltage on the Udaloy for the radar motors and lights
is 3V. Exceeding that voltage will most likely cause damage to the
lights or motors. Always use the supplied switching module.
The Udaloy comes with a 30A waterproof ESC with a built in BEC.
The BEC can provide power to the receiver, steering servo and 2
turret servos’. If you plan to use more electronics with your receiver
or think you will be overloading the BEC with excessive use of the
servos we recommend installing a separate BEC or power source to
avoid overloading the existing BEC.
Always consult the Udaloy wiring diagram if you plan to make any
changes to your setup.