27
Operating Instructions Sky Surfer 2.0
3. Assembly
Snap propeller guard axle set
into propeller guard
The stopper of the rear shaft must
fit into the groove of the chassis.
Snap system, just snap the tires
onto the axle. Pay attention to the
„klick“.
When remove the tire, just pinch
the stopper of the axle tip.
ELECTRICAL ELEMENTS
Rise / Descent
ON/OFF switch
Left / Right
Antenna
Power LED
Trim
Left / Right
Trim
Rise / Descent
Transmitter 2.4 GHz
Steering servo (built-in)
Driving motor (built-in)
