GRAUPNER Sim-Control 6, Руководство пользователя

Страница: 4 / 8

4 - 8
33006_jh_V1
Intended use
The
Graupner Sim-Control 6
is a six channel controller that can be
connected to a PC by USB cable to use flight simulators, as
Reflex XTR, G3-G4.5, APD and Phoenix RC. The
Graupner
Sim-Control 6
is suitable for airplane, glider, copter and helicopter
models simulators.
Other uses are not allowed. For any improper use no warranty
or liability is accepted.
There are two different stick function configurations available.
(Mode1, Mode 2)
Read through this entire manual before you attempt to install or
use the
Sim-Control 6
.
Graupner/SJ
constantly works on the development of all prod-
ucts; we reserve the right to change the item, its technology and
equipment.
Package content

Sim-Control 6 with USB cable

Manual
System requirements
Minimum hardware requirements for your PC:

Intel Pentium 600 or higher

32MB GAP 3D hardware accelerated graphics board

128MB RAM

10 GB free hard-disk memory

52X CD-ROM
Technical Data
Number of controls 6
Model types Plane / glider / heli
DSC port USB PPM
Current source port USB 5 V
Supported simulators Reflex XTR, G3-G4.5, APD,
Phoenix RC
USB cable length 1 meter
Current consumption 26 mA
Dimensions 180 x 220 x 70 mm
Weight 526 grams