GRAUPNER S2007 Ultra DC Quad, Руководство по эксплуатации

Страница: 16 / 20

16
②
Press ENTER button shortly then the value of discharge current blinks, press DEC/
INC buttons to set the desired discharge current
③
Press and hold ENTER button to start to discharge battery
※
Pb battery don’t have cycle function.
◎ DISPLAYS DURING CHARGE/DISCHARGE
Charge/Discharge current
Charge/Discharge capacity
Battery type Battery voltage
Operating time Operating mode
CHG Charge mode DCH Discharge mode
C->D Charge to Discharge D->C Discharge to Charge
BLC When a battery is connected to balancer connector
- Operating mode
ㆍ
NC : NiCd, NiMH
ㆍ
LP : LiPo
ㆍ
LI : LiIon
ㆍ
LF : LiFe/A123
- If you press ENTER button then the charge or discharge is terminated.
- If you press and hold DATA VIEW button for more than 3 sec, you may check the pro-
gramming setup status. Press DEC/INC buttons to go to other mode and press DATA
VIEW button again to get back to the previous display. You may get the all information
such as input/output voltage, battery voltage/ capacity, the voltage of the highest/ low-
est cell, the voltage of each cell, the average voltage, the peak voltage, the balancer
voltage, the peak temperature.
- Battery type
When balancer connector is ported, this display is ap-
peared. Press ENTER button then the value [01] blinks,
press DEC/INC buttons to check the voltage of each cell.
It is the other display when balancer connector is ported
you may check the max/min voltage
Pb
D=1.0A
DISCHARGE
BATTERY
PLEASE
CHECK
WAIT....
CHG
NC
00000
7.200V
0:00
+3.00
INPUT =
OUTPUT =
LCB-[ 01 ] =
LCB-AVG =
LCB-MAX =
LCB-MIN =
0.00 0.00 0.00V
0.00 0.00 0.00V
TEMP.PK 0.0
℃
TEMP. 0.0
℃
ChgCAPA =
DchCAPA =
CHG PEAK=
DCHG AVR=
12.08V
8.08V
0.000V
0.000V
0.000V
0.000V
0mAh
0mAh
0.00V
0.00V
ㆍ
PB : Pb