GRAUPNER MZ-10 HOTT, Руководство пользователя

Страница: 40 / 48

40 / 48
S1042_sh_V1
Teacher/Student (T/S)
An
mz-10 HoTT
transmitter can be combined with any suitable HoTT
transmitter for a wireless Teacher-Pupil system. However, note the
following:
Note
Completely independently from the related teacher transmitter
defaults in a pupil transmitter type mz-10 HoTT the training model
MUST ALWAYS be bound to the pupil transmitter. In addiction it is
absolutely essential for correct training that the model memory
active in the teacher model is not bound to any receiver.
Preparing for training mode
Teacher transmitter
The training model must be programmed with all its functions includ-
ing trimming and any mixed functions in a model memory of the
HoTT teacher transmitter. The model provided for training must
therefore be completely controllable by the teacher transmitter.
To conclude preparations, bind the training model to the pupil trans-
mitter.
From a
mz-10 HoTT
teacher transmitter all the five channels will be
transmitted to the pupil transmitter.
Pupil transmitter
After the training model has been completely programmed into the
teacher transmitter, and its full operational capacity has been
checked by a practical test, the training model can be bound to the
pupil transmitter mz-10 HoTT in "NORMAL" mode.
The "Control mode" can be adapted to the pupil's preferences, even
if the common conventions to follow are:
Channel Function
1 Motor throttle
2 Aileron
3 Elevator
4 Rudder
In an
mz-10 HoTT
pupil transmitter the active mixers 2AILE and/or
DELTA have to be switched off so as the servo direction of all servos
(CH1 -CH5) have to be set to "normal".