GRAUPNER GmbH & Co. KG * Henriettenstrasse 94-96 * 73230 Kirchheim/Teck
www.graupner.de
*
www.tangent-modelltechnik.com
4
Kit contents -
(See Parts List for details)
1
Pair of wing panels – Carbon Champ Edition, incorporating LSCTP,
3D optimised leading edge & tip section, torsion-rigid INTRO Technology, integrated
Elastik Flaps, square Carbon Hybrid wing joiner, TA Servo-Locks and TA wing locking
system.
1
GRP Fuselage – in brilliant white, Carbon reinforced with built-in Bowden
tubes.
1
Canopy - preformed in Carbon.
1
All flying tail plane – factory finished.
1
Rudder – factory finished.
1
Assembly instructions – sheet.
1
Decal set.
1
Wooden parts set.
1
Accessory pack – quality Contestline components.
1
Square wing joiner – Carbon Hybrid Tec
1
Wire parts set.
Technical Data
Wingspan (mm)
ca 3360
Fuselage length (mm)
1670
Wing area (FAI) (dm²)
72
Weight (gm)
from 2800
Wing loading (FAI)(gr/dm²)
From 39
Airfoil
MH 32
Longitudinal dihedral (deg)
about 1
Centre of gravity (mm from root leading edge)
100
RC functions
Ailerons
2
DS3288 (#5187) or DES 448 (# 7914)
Flaps
2
DS3288 (#5187) or DES 448 (# 7914)
Rudder
1
DES 587 (#7932)
Elevator
1
DS 3781 (#5161)
It is very important that the Receiver Battery be selected to properly match the intended use.
The capacity ought to be sufficiently generous to cope with the load of the on board radio
control system. Considering the use of 6 servos, we recommend a battery capacity (C) of at
least 2300mAh. We recommend #765.2 LiPo battery pack with a PRX-3A switch. We further
recommend that the condition of the receiver battery is checked regularly, using our # 7599
Battery Guard.
In the case where an electric drive system is to be installed, we recommend the following
proven combination:
Motor:
Inline 750 14,8V (Grp. #6608)
Spinner:
Precision Spinner (Grp. #6040.5)
Propeller:
Carbon Folding Propeller (Grp. #1336.36.20)
Speed Controller:
Brushless C 70A (Grp. #7237)
Battery Pack:
LiPo 3/3700 (Grp. #7661.3).
