18 / 36
S1036.77_jh_V1_de
Symbols in the display
Telemetry symbols in the display
The active model memory has not yet been bound to a receiver.
Not flashing: RF transmitter function switched off.
Blinking antenna symbol: Last receiver bound to the active
model memory is inactive or out of reach
No telemetry signal to receive
Signal strength display of the model connection
Signal strength display of the connection with pupil transmitter
in the teacher transmitter display with wireless connection
Position indicator
INC/DEC buttons CTL 5 and 6
Once you activate one of the CTRL dials 5 + 6 in the middle of
the transmitter upper part, a symbol appears on the left near the
vertical trim position indicators in the lower display.
Contemporaneously the vertical position indicators change
during the operation from the trim position to the CTRL dials 5
+ 6 indicating their actual position.
The left bar shows the position of the left INC/DEC CTRL dial 5
and the right bar shows the position of the position of the right
CTRL dial 6 (both horizontal bars show the trim position of the
related sticks trims).
Approx. 2 seconds after the end of the operation of both but-
tons, the display shows again the actual trim position of the trims
(elevator/nick and throttle/pitch) of the related sticks.
Key pad
Keys left of the display
ESC button
Pressing the ESC button brings about a stepwise return to func-
tion selection or back to the basic display. Any setting changed
in the meantime is retained.
Momentarily touching the ESC key for about 1 second while in
the base screen will open and close the Telemetry menu.
Selection keys
Momentarily pressing one of these keys will cause analogous
paging in the given arrow direction through lists, e. g. through
the model selection list or the multi-function list or within menus
though the menu lines.
M
M
P
GRAUBELE
#01
2:22h
S
L
K78
0:00.0
0:00.0
RX0.0V
3.9V
M
HoTT
ESC
