GRAUPNER GENIUS PRO 120R for W-Lan Скачать руководство пользователя страница 4

4 / 32

S3084_S3086_S3078_S3085_MP_V1

Introduction

Thank you very much for purchasing the 

Graupner

 

Genius Pro 

speed controller

. This speed controller is extremely versatile. This 

manual is valid for all speed controllers listed on the cover sheet.
Read this manual carefully to achieve the best results with your 

speed controller and first of all to safely control your models. If you 

experience any trouble during operation, take the instructions to 

help or ask your dealer or 

Graupner

 Service Centre.

Due to technical changes, the information may be changed in this 

manual without prior notice. Keep updated by regularly checking 

our own website, 

www.graupner.de

 to be always updated with the 

products and firmware.
This product complies with national and European legal require-

ments.
To maintain this condition and to ensure safe operation, you must 

read and follow this user manual and the safety notes before using 

the product!

Note

This manual is part of that product. It contains important informa-

tion concerning operation and handling. Keep these instructions for 

future reference and give it to third person in case you gave the 

product.

Service Centre

Graupner Central Service

Graupner/SJ GmbH
Henriettenstraße 96
D-73230 Kirchheim/Teck

   

Servicehotline

   

 (+49) (0)7021/722-130

   Monday - Thursday:
   9:15 am - 4:00 pm
   Friday:
   9:15 am - 1:00 pm
   

 

[email protected]

Graupner USA 
3941 Park Dr Suite 20-571
El Dorado Hills, CA 95762

Website: www.graupnerusa.com
Phone: +1 855-572-4746
Email:[email protected]

Graupner 

in Internet

 

  For the service centers outside Germany please refer to our web site 

www.graupner.de

Содержание GENIUS PRO 120R for W-Lan

































Отзывы: