GRAUPNER Falcon 12, Руководство пользователя

Страница: 42 / 52

42 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
4. SWP servo mid
Setting the neutral position of the fourth SWP servo.
Note
Effective only if "4 Servo" is selected in the "SWP Type" line of the
display "Basic settings contr.".
Logging
Logs the selected functions to the transmitter's SD card for later
evaluation and error analysis of logging activated on the transmitter
side.
0 = no logging
1 = roll and nick logging
2 = roll logging
3 = nick logging
4 = tail logging
We recommend always logging at least one function.
Expertmode
This option is set to "No" by default, and for the first steps with the
new system, more experienced helicopter pilots should leave this
setting as it is. In particular, the swash plate and tail rotor menu is
much clearer. After the acclimation it is still possible to switch, if nec-
essary, to the expert mode and its additional possibilities.
Attention
Even with the expert mode set to "no" this is not switched off but
it is in the background with the current settings effective. This is
particularly important when installing a previously used receiver in
a new model. Therefore, for safety's sake, a receiver reset, as
described above, should be carried out before the start of the pro-
gramming work.
Display "Axis assignment"
In this display, the axis assignment of the individual gyro elements
and their effective direction must be determined.
Do setup
After selecting the line "do setup" and changing the value field to
"yes", assign the axes as follows:
Do setup step by step
1. If not already done, check the directions of movement of all ser-
vos and if necessary correct them in the transmitter.
2. Change to the display page "Axis assignment".
Axis assignation
Tail (Right): +0
Direktanteil N +115
Do setup No
Roll (Right): +0
Nick (Push): +0