22 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
TRAVEL –/+
In these two lines you can define the mixer ratio in relation to the
source channel (FROM CHANNEL); the value is set separately for
both directions.
Programming examples
V-tail with rudder differential
FREE MIXER
FROM CHANNEL: 3
TRIM: +0%
TRAVEL–: +100%
MIXER 1
: +100%
TO CHANNEL: 4
FREE MIXER
FROM CHANNEL: 4
TRIM: +0%
TRAVEL–: +60%
MIXER 2
: +100%
TO CHANNEL: 3
FREE MIXER
FROM CHANNEL: 4
TRIM: +0%
TRAVEL–: +100%
MIXER 3
: +60%
TO CHANNEL: 4
Differential is not normally necessary with this tail type. Mixer 3 is
not required if you do not need rudder differential, and TRAVEL for
mixer 2 must then be set to +100%.
Alternatively you may prefer to carry out the programming using the
transmitter menu. A ‘Rudder -> elevator’ mixer can be set up at the
transmitter instead of ‘Free mixer 3’ at the receiver. This option frees
up one mixer at the receiver.
Delta with aileron differential
FREE MIXER
FROM CHANNEL: 2
TRIM: +0%
TRAVEL–: +100%
MIXER 1
: +60%
TO CHANNEL: 3
FREE MIXER
FROM CHANNEL: 3
TRIM: +0%
TRAVEL–: +100%
MIXER 2
: +100%
TO CHANNEL: 2
FREE MIXER
FROM CHANNEL: 2
TRIM: +0%
TRAVEL–: +60%
MIXER 3
: +100%
TO CHANNEL: 2
In this example aileron differential is set to 40%. Alternatively you
may prefer to carry out the programming using the transmitter
menu. An ‘Aileron -> elevator’ mixer can also be set up at the trans-
mitter instead of ‘Free mixer 3’ at the receiver. This option frees up
one mixer at the receiver.
Two elevator servos
(channel 6 for the second elevator servo)
FREE MIXER
FROM CHANNEL: 3
TRIM: +0%
TRAVEL
–: +100%
MIXER 1
TRAVEL
+: +100%
TO CHANNEL: 6
Содержание Falcon 12
