6
Take waste adhesives and paints to your nearest toxic waste collection point.
An unobstructed work area of generous size is very helpful for all types of modelling activity.
If you are a beginner to modelling and are not sure about any of the more difficult processes, ask an
experienced modeller for advice and help.
Rules of behaviour
Never fly your model from a public road, path or square, or in the vicinity of buildings or high-tension
overhead cables.
Don’t fly your ELEKTRO KADETT in nature reserves, protected areas or SSSIs (Sites of Special
Scientific Interest). Please have respect for the animals and plants which live in and around your flying
site.
Bear in mind that trees and bushes are the living space and nesting sites of birds, and should not be
disturbed unnecessarily.
Never endanger animals, spectators or other pilots.
Radio control system for the ELEKTRO KADETT
We suggest the following items as the minimum equipment for this model:
1
mc-12 computer RC system, 35 MHz band
Order No. 4724 or 4724.B
4
DS 3728 servos
Order No. 5158
1
R 700 micro-receiver
Order No. 3551
1
COMPACT CONTROL 40 speed controller
Order No. 2884
or
1
GRAUPNER GENIUS 40 speed controller
Order No. 2896
2
Extension lead
Order No. 3935.11
2
Extension lead
Order No. 3935.32
1
Hook-and-loop (Velcro) tape
Order No. 3368.1
Please see the main GRAUPNER FS catalogue for details of suitable battery chargers.
Motor and accessories
Motor
Order No.
Propeller
Order No.
Spinner
Order
No.
Propeller
adaptor
Order
No.
Flight
battery
Order No.
Speed
controller
Order No.
COMPACT
350
8.4 V
7713
28 x 12 cm
2945.28.12
50 mm
Ø
215.50
286
2 LiPo 2000
7.4 V / 2 Ah
7640.2 or
2 LiPo 3200
7.4 V / 3.2
Ah
7650.2
COMPACT
CONTROL 40
2884 or
GRAUPNER
GENIUS 40
2896
COMPACT
480
9.6 V
7714
28 x 15 cm
1318.28.15
1171
3 LiPo 2000
11.1 V / 2
Ah
7640.3 or
3 LiPo 3200
11.1 V / 3.2
Ah
7650.3
COMPACT
CONTROL 40
2884 or
GRAUPNER
GENIUS 40
2896
1 x M8 retaining nut
Order No. 1077
1 x Propeller spacer
Order No. 609 (part 8)
The model is very highly pre-fabricated, and is built to an extremely high standard. The kit includes a
GRP cowl. Please check the covering of the major components and run an iron over any areas of film
which have become slack. Iron down all edges, especially at the control surface hinges and where film
