GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved! No liability for printing errors. Id.-No. 0062205 06/2011
7
Glue the plastic main undercarriage bracket (23) in the fuselage, then assemble the
undercarriage components (24) to (27) as shown in the picture. Note that the wire
undercarriage unit (27) must face forward.
Offer up the two inner wheel leg fairings (38) to check that they fit; you will need to
adjust the angle of the top edge using a balsa knife.
The photo shows the parts of the main wheels and fairings / spats. Glue the prepared
leg fairings (38) to the wire undercarriage unit (27), then slip the collet supports (37)
onto the axles and glue them in place.
