GRATTEN GA1022CAL, Руководство пользователя

Страница: 78 / 134

61
2. Press the first option key to skip to the measurement function menu 1 in a
measurement result region in the homepage.
3. Select “Voltage measurement” .
4. Press “Signal source” , and select CH1 or CH2 according to the signal input channel.
5. Press “Measurement type” or revolve the [UNIVERSAL] knob to select the voltage
parameters to be measured.
The corresponding icons and parameter values will be displayed in the menu
corresponding to the third option key, as shown in figure 2-55.
Figure 2-55 Specific item measurement
6. When get back to the measurement result region in the homepage, the selected
parameters and the corresponding values will be displayed in the first option.
Other option measurement types can be changed by the same method, and the
homepage can display five parameters every time.
The voltage parameters can be measured by using the all measurement function by the
following steps:
1. Press [MEASURE] to skip to the “MEASURE” menu.
2. Press any option key in the homepage to skip to the measurement function menu 1.
3. Select “All measurement” .
4. Press “Signal source” to select the signal input channel.
5. Press “Voltage test” to select “Run” . At the moment, all the voltage parameter